DESCRIPTION	RATE
Test on Cement
Consistency, Initial setting time, Final setting time	1200
Fineness Test	400
Soundness Test	1000
Specific Gravity of Cement	300
Compression test on cement cubes (3 Nos)	250
Test on Concrete
Concrete Mix Design	15000 and 20000 for mix above M40
Compression test on cement concrete cubes (3 Nos)	250
Compression test on cement concrete cylinders (3 Nos)	250
Flexure test on cement concrete beams	200
Tiles
Absorption Test on tiles (3Nos)	150
Transverse test on tiles (3 Nos)	100
Mosaic-Tiles breaking load(3 Nos)	150
Abrasion Test for flooring tiles	400
Ceramic (glazed) tiles - bending, absorption, impact strength tests	1500
Paving Block
Compression test (1 No)	150
Absorbtion Test ( 3 Nos)	150
Wood
Transverse test, Compression test, moisture content	700
Aggregates (Coarse Aggregates)
Fineness Modulus	400
Sieve Analysis	400
Abrasion Test	1000
Impact Test	540
Crushing Test	600
Specific Gravity and Absorption Test	600
Bulk Density	150
Soundness Test	1000
Flakiness Index	270
Elongation Index	270
Percentage of Voids	270
Gradation (wet)	450
CBR	5000
Fine Aggregate or Sand
Fineness Modulus	400
Sieve Analysis	400
Specific Gravity	300
Percentage of Voids	270
Bulking Factor	300
Bulk Density	300
Bricks
Taking measurements for one brick-avg of 6 No.s	100
Efflorescence test on brick (1 No)	200
Weight (3 Nos)	100
Compression Test(3 Nos)	250
Absorption test on bricks (3 Nos.)	150
Transverse test on bricks	150
Bitumen
Ductility	450
Penetration	450
Abar's Flash Point	1000
Softening Point	450
Viscosity	800
Specific Gravity	450
Extraction	2100
Fatigue Test	8000
Stiffness Test	8000
Dynamic Cone Penetration	800
Creep	8000
Mastic Asphalt Hardness test	3000
Metals
Taking weight per meter of steel rods (Avg 3 Nos)	100
Tension Test-Yield Strength, Ultimate Strength, Percenatage elongation	500
Tension Test for Ulitimate Load in welded joints/ wire	400
Tesntion test for ultimate loading wire ropes	400
Thickness measurement of metal sheets	100
Cold bending test	300
Hardness Test Single Specimen	200
Hardness Test average of three sets	400
Impact test single specimen	100
Impact test- average of three sets	400
Shear test	150
Fatigue test	500
Rivet Test	200
Tesing of springs (Compression and Tension Test)	400
Testing of Water
Sulpahte	500
Chloride	750
Iron	500
Total Solids	300
pH	200
Total Suspended Solids	350
Dissolved Oxygen	750
Total Dissolved Solids	350
Organic Content in solids	500
Inorganic Content in solids	400
Acidity	300
Alkalinity	300
Hardness	300
Nitrates	600
MPN	750
BOD per sample	450
COD per sample	250
TOC (using TOC Analyzer)	300
Testing of Soils
Sulphate	400
Chloride	500
Iron	400
Organic Content	300
pH	250
Nitrates	500
Heavy Metals per Sample using Atomic Absorption Spectometer	500 per heavy metal
Heavy Metals(mercury) per Sample using Atomic Absorptia Spectometer	750
Consolidation of Soil
a)coefficeint of consolidation	2500
b)compression index	4000
Unit Weight/ Density	200
Permeability Test on Soil	1500
UCC Test on Soils	1500
Sp.Gravity of Soils	400
Dry Sieve Analysis of Soil	500
Wet Sieve Analysis of Soil	1000
Hydrometer analysis of soil	1500
Atterberg Limits	500
a)Liquid Limit
b)Plastic Limit
c)Shrinkage Limit
Triaxial Test UU	4000
Moisture Content of soil (sealed sample)	200
Direct Shear Test	2000
Standard Proctor's Compaction Test	1500
a) Optimum Moisture Content
b) Maximum Dry Density
Caliberation of machine (T&D for one teaching staff and one Non-teaching staff)	3000
Core Cutter	1500/core
Bumb Integrator	4000/kM
Clug Impact Testing	800
Merlin	2500/kM
Benkleman beam Testing	1500/kM
Geogauge	3000
Portable type Weigh bridge	2000
Slit and Clay Content	400
Transverse Test on Rocks	200

Faculty Incharge of Consultancy

Er. Sindhu A R
Assistant Professor
Department of Civil Engineering
Saintgits College of Engineering
Pathamuttom, Kottayam
Email: sindhu.a@saintgits.org
Ph: 9495931676

NOT SET

NOT SET

NOT SET