Mr. Anish Thomas

LATEST UPDATES

Saintgits wins the prestigious IDA – STEM Award for Community Development.
Saintgits ASCE Student Chapter qualified in the ASCE Sustainable Solutions Competition at ASCE India Student Symposium and earned an invitation to represent India at the finals rounds going to be held at Louisiana Tech University in Ruston, Louisiana, USA
ASCE Saintgits Student Chapter bagged Third Prize at ASCE National Concrete Canoe Competition, hosted by Punjab Engineering College, Chandigarh.
500+ Placement Offers and counting for the Batch of 2022
Mr. Anish Thomas

Mr. Anish Thomas

Designation: Assistant Professor

Area: Applied Electronics & Instrumentation

Educational Qualifications

PhD : Chemical Engineering (pursuing in NIT Calicut)

M-tech : Control & Instrumentation 

B-tech : Applied Electronics & Instrumentation 

Experience

Industry : 2 yrs 7 months

Teaching : 3 yrs 5 months

Research : 5 yrs

 

Publications/Conferences

  • Published a paper titled “Comparison of the Steady state Performances of 2×2 Regulatory Control Structures for Fluid Catalytic Cracking Unit” in Arabian Journal of Science and Technology.(IF-1.5)
  • Communicated a paper titled “Steady State Analysis of a Fluid Catalytic Cracking Unit in Aspen HYSYS” to Journal of Petroleum Science and Technology (Under review).
  • Published a research paper titled “Predictive control of coagulant dosage in water treatment plant” in International Journal of Engineering Research & Technology, 3(7), 2014.
  • Published a research paper titled “Speed control of a DC motor using fractional order proportional derivative (FOPD) control” in International Journal of Engineering Research & Technology, 3(1), 2014.
  • Presented a poster entitled “Steady state simulation of a Fluid Catalytic Cracking Unit using Aspen HYSYS” in 30th Kerala Science Congress on 28th–30th January 2018.
  • Presented a paper entitled “A patient rehabilitation system using a Man-Machine Interface design” at 1st National Conference on Man Machine Interaction(NCMMI) held on 25th April 2014, organized by VIT Chennai.
  • Presented a paper entitled “Fractional Order Proportional Derivative Speed Control” at the International Conference on Emerging Trends in Advanced Engineering Research held on 20-21st February 2012, organized by Baselios Mathews II College of Engineering.

FDP/MOOC/Workshops attended

  • 1 hour MOOC on ‘Digital feedback control with arduino’ conducted by Udemy. (November 2019).
  • 0.5 hour MOOC on ‘Exploring RPA Automation technology and tool’ conducted by Udemy. (November 2019).
  • 0.5 hour MOOC on ‘Engineering simulation with simscale : drone aerodynamics’ conducted by Udemy. (November 2019).
  • 2 hour MOOC on ‘Passive Income’ conducted by Udemy. (October 2019).
  • 0.5 hour MOOC on ‘PID control using Arduino’ conducted by Udemy. (October 2019).
  • 3 hour MOOC on ‘Process control and instrumentation’ conducted by Udemy. (September 2019).
  • 3.5 hour MOOC on ‘Aerospace engineering : Aircraft fundamentals and Advanced’ conducted by Udemy. (August 2019).
  • One hour MOOC on ‘The science & spirit of energy & orbs’ conducted by Udemy. (August 2019).
  • One hour MOOC on ‘Wireless power to the people – Wireless charging 101’ conducted by Awesome academy and Udemy. (August 2019).
  • One day workshop on ‘Advances in Biomedical engineering and research’ conducted by Electrical Engineering department-NITC.
  • One day workshop on ‘ACS on Campus-Preparing your manuscript, peer review, scifinder’ jointly organized by American Chemical Society and NITC.
  • Two day TEQUIP sponsored workshop on ‘Patent and Intellectual Property Rights’ jointly organized by KSCSTE and NITC.
  • One day TEQUIP sponsored workshop on ‘Research Writing: Technical and language aspects’ conducted by Mechanical Engineering department-NITC.
  • One week TEQUIP sponsored workshop on ‘Novel Seperation Technologies’ conducted by Chemical Engineering department-NITC.
  • Two day TEQUIP sponsored workshop on ‘Advanced Optimization techniques in Chemical Process Industries’ conducted by Chemical Engineering department-NITC.
  • Two day TEQUIP sponsored workshop on ‘Advanced Mathematical approaches in Chemical Engineering’ conducted by Chemical Engineering department-NITC.
  • Ten day ISTE workshop on ‘Control Systems’ conducted by IIT Kharagpur.
  • Three day workshop on ‘Soft Computing Techniques in Advanced Power System Analysis conducted by EEE department of Saintgits college of engineering.
  • Two day ISTE Workshop on ‘Steps to Research’ conducted by Amal jyothi college of engineering, Kanjirappalli.
  • Three day IEEE Workshop & Conference on ‘Solid State Circuits’ conducted by ECE department of Saintgits college of engineering.
  • Two Week ISTE Workshop on ‘Signals and Systems’ conducted by IIT Kharagpur.
  • One day IEEE workshop on ‘Xilinx based FPGA Design’ conducted by ECE department of Saintgits college of engineering.
  • One week workshop on ‘Industrial Automation’ conducted by AEI department of Saintgits college of engineering.
  • One week workshop on ‘ORCAD, Matlab & DSP Processors’ conducted by ECE department of Saintgits college of engineering.
  • Two week AICTE sponsored workshop on ‘System simulation with Matlab, Maple & LabVIEW’ conducted by Instrumentation department-NSS College of engineering.
  • Three day NBA Orientation/Training programme focused on ‘Facilitation of Outcome-Based Education and Accreditation’ conducted by Saintgits college of engineering.
  • Ten-day ISTE workshop on ‘Analog Electronics’ conducted by IIT Kharagpur.
  • Three day Conference, ‘ICGITS 2013:International Conference on Global Innovations in Technology & Sciences’ conducted by Saintgits college of engineering.
  • Two-day ISTE workshop on ‘Aakash for education’ conducted by IIT Bombay.
  • One week workshop on ‘EPKS C200/C300 Fieldbus Configuration’ conducted by Honeywell Automation India Limited.
  • One week workshop on ‘DCS Fundamentals & Engineering’ conducted by Yokogawa India Ltd.
  • One day course on ‘High-performance computing’ conducted by IBM India and Karunya University, Coimbatore.
  • Certified Automation Engineer (Prolific Technologies – 3 months course), PLC(Allen Bradley, Siemens, Modicon), DCS (Microware), Drives (Altivar 28), SCADA(In Touch) & Panel Designing.
  • Certified Embedded Varsity Associate Trainee (Emblitz Technologies – 2 months course)

External talk

  • Delivered an expert talk on ‘HART Calibrator’ at Electronics & Instrumentation department, Vimal Jyothi Engineering College.

Memberships

  • Life member of Indian Society for Technical Education (ISTE)

Research interest

  • Process Control, Modeling and simulation

Achievements

  • Judge of Robotics projects in Srishti-2019.
  • Judge of Instrumentation projects in Srishti-2014.

Workshops Organized

  • Co-coordinator of a one week workshop on ‘Industrial Automation’ conducted by Prolific Technologies.

Contact Details

Mobile: +91 884 803 1190, 828 113 0325

Email: anish.thomas@saintgits.org

Personal website

https://sites.google.com/saintgits.org/ats-personal-website/home

Quick Contact

SAINTGITS COLLEGE OF ENGINEERING

Kottukulam Hills, Pathamuttom
PO Kottayam, Pin – 686532, Kerala

Tel: +91 481 2430349, 2436169, 2436170

Email: mail@saintgits.org

For Admission please contact:
Anju Anna Jacob
Admissions Officer
+91 9895903278, +91 8129702585
anjukakkad@saintgits.org

Quick Facts

© 2019 Saintgits Group of Institutions